|
Prevent damage to your machine Now is one of the best times for a Preventive Maintenance Service (P.M. program) for your Okuma lathe or machine center. With the hot summer months soon to arrive, heat is one of the worst enemies of your electronic components. On a Hartwig, Inc. P.M. program we make sure your machine can efficiently transfer the heat from these controlled areas. This will maximize the life of these items and help avoid an unplanned failure.
Another area we check is in the lubrication of the machine. Most of the lubrication hardware is under covers, so a problem could go undetected. We do what is necessary to view these areas and check that the system is working as designed. Wipers are another item checked in these hidden areas that can cause severe damage if they would fail. The bearings and ballscrews are also checked.
All of the hydraulic oils and lubricants are drained, tanks cleaned and filters changed. We know our car runs better and lasts longer when the oil is changed and the same principles apply to these hard working machines. Ask yourself "If I made the investment of a high quality machine tool, would the fluids would be changed at factory recommended service intervals?" On our machine health check, all the axis are tested to determine if they are performing to factory specifications. If a problem is found, a software solution could be suggested or a mechanical update may be the best solution. The spindles are also checked for proper operation and tool retention pressure is checked and recorded on a machine center.
This service from Hartwig, Inc. is less than 1% of your total machine investment. With the added security of minimizing unexpected down time, Preventative Maintenance Programs make this one of the best values for your bottom line.
Please contact us if you have any questions or would like to schedule a time slot for your machine. |
